ARS RECLAIM PROCESS:
After ink is carded out at the press and tape is removed from frames, follow these steps for reclaiming screens;
- If you are using a dip tank; use the 2 in 1 emulsion softener/ink remove and allow to dwell.
- If you spray you chemistry; apply emulsion softener (do not apply ink degradeant) as the ARS removes emulsion and ink in one pass.
- If dehazing is required, apply and run through ARS.
Each pass takes about 30 seconds and 2 passes completes the reclaim process. Screens are cleaned of ink and emulsion simultaneously. There are no chemical tanks accumulating waste product requiring constant cleaning and product disposal. When screen is placed on conveyor, it moves through the Autoblaster/ARS where high-pressure water jets clean both sides of screen simultaneously.